NEW WATER TANKS

• The Activator paint is an enhance version of our original SilverDYNE^® soluition it comes in 1 liter bottles and 200 litter drums. When applied to concrete or clay tanks you receive the best results.
• The paint has to be applied away from the sunlight.
• On new tanks paint should be applied in a room that has no sunlight. An over-head safety light is best used while applying the paint.
• Paint must be applied with a sponge, do not use any paint brush with metal bands or any thing that has metal on it.
• The tanks inner surface must be thoroughly dry before applying the paint.
• Always use plastic gloves as the stains on skin produced by the paint will last for weeks.
• After the paint is dry (let paint dry for 12 hrs) then fill the tank and leave the water there for a minimum 30 minutes before rinsing the tank. The water will appear yellow in color until you rinse the excess of paint off the walls. Repeat rinsing until water flows clearly. If you use the rinse water to wash clothes or anything else before you get a clear rinse, it will permanently remain stained, but drinking it is safe.
• Tanks must have a lid to keep out the sunlight

• The tanks have to be drained and cleaned out before applying paint.
• When cleaning the tanks, avoid the use of high pressure water cleaners because they leave a very humid atmosphere inside the tank making it more difficult to dry.
• The tanks inner surface must be thoroughly dry before applying the paint.
• Paint must be dry before filling the tanks
• Always use plastic gloves as the stains on skin produced by the paint will last for weeks.
• After the paint is dry fill the tank and leave the water there for a minimum of 30 minutes before rinsing the tank. The water will appear yellow in color until you rinse the excess of paint off the walls. Repeat rinsing until water flows clearly. If you use the rinse water to wash clothes or anything else before you get a clear rinse, it will permanently remain stained, but drinking it is safe.
• After rinsing, the final appearance of the tank might look as if there is nothing on it, this is OK. Only direct sunlight will make the ionized silver change its chemical structure to metal silver, generating a black spot on the illuminated area.
• Once painted, the tanks should only be filled from the top, not a must but strongly recommend. If filled from the bottom, the new water must be in the tank for 30 minutes before drinking. As the water is used it has to be replaced, tanks should never get below 20% full.

• Paint must be applied away from the sunlight.
• Paint must be applied with a sponge..
• On all bowls or pitchers the paint must be applied in a room that has no sunlight, a safety light is best used while applying the paint in-doors.
• The bowl or pitcher inner surface must be thoroughly dry before applying the paint.

• Pour a small amount of paint into the bowl or pitcher and wipe paint in a circular motion with a sponge to get best results. Avoid dispensing the product on the sponge directly from the container as the remaining paint in the container might get contaminated.
• Never return excess product from the bowl or sponge back into the paint container, but you can pour excess paint into the next bowl or pitcher to keep the production moving.
• After the paint is dry (let dry for 24 hours) then rinse the bowl or picture. The water will appear yellow in color until you rinse the excess of paint off the walls. Repeat rinsing until water flows clearly. If you use the rinse water to wash clothes or anything else before you get a clear rinse, it will permanently remain stained, but drinking it is safe.
• Always use plastic gloves, as the stains on skin produced by the paint will last for weeks.
• They are sold in 1 litter bottles and 200 liter drums.

• Concrete or clay surfaces are the very best for applying SilverDYNE^® paint Activator
• Pour a small amount of paint into the clay pitcher than use a small sponge to apply paint to the inside of pitcher until fully absorbed, than take excess paint and pour it into the next pitcher following the same process over and over.
• It is best to wear rubber gloves when applying the paint as it will stain your hands for approximately two weeks, but it is not harmful to the skin.
• Paint should only be applied with a sponge not paint brushes.
• A small amount of the product will come off into the water after the initial filling. This will cause the water to appear as a light yellow in color. At this time, the water is not harmful for consumption but can look different in appearance.
• Always rinse the pitcher after painting 10 to 12 times or until water in the pitcher is clear.
• The paint is available in a 1 liter container and a 200-liter cask

---